Chisels, marking and carving knives
Wood Carving marking Chisel knife Kiridashi
¥2,195
Japanese Kiridashi carpenter marking carving precision knife. Total length : 15,5 cm (6.1")Length of the blade : about 6 cm (2.4")Length of the cutting edge : 4 cm (1.6")Blade thickness : about 1,5 mmWeight : about 45 grams (including sheath)Blade : SK SteelHandle : WoodMade in Japan.
Marking gauge Kebiki with 2 blades
¥2,695
Small japanese Kebiki marking gauge with 2 adjustable single-bevel marking blades. They leave a very fine and tear-out-free mark without tearing the grain. The advantage of the blade is that it cuts the fibres, whereas a needle tears them. It can be used to cut a single line or both blades can be used in tandem to lay out a mortise or tenon.Si...
Wood Carving marking Kiridashi Chisel knife YOSHIHARU
¥1,495
Japanese Kiridashi YOSHIHARU carpenter marking carving precision knives. Available for right or left handed. Total length : 12,8 cm (5")Length of the blade : about 3,7 cm (1.46")Blade thickness : about 1 mmWeight : about 20 grams (including sheath)Blade : SteelHandle : BrassMade in Japan.
Hand-forged 15mm kensaki shirabiki Spear point marking knife
¥4,895
Japanese double edge "Ikeuchi Hamono" Hand-forged Kensaki shirabiki spear-point marking knife. Hand-forged by japanese master blacksmith Ikeuchi. Size : 15 mmLength of the blade : about 16 cmBlade thickness : about 2 mmWeight : about 50 grams Blade is made of lamination of blue steel Aogami (HRC 63) and soft steel with hammer eyes.For right- ...
Marking gauge small Kebiki with 2 blades
¥3,195
Small japanese Fujiwara Kebiki with 2 adjustable single-bevel marking blades. They leave a very fine and tear-out-free mark without tearing the grain. It can be used to cut a single line or both blades can be used in tandem to lay out a mortise or tenon.Size : 110 mm x 120 mm x 70 mm (4.3" x 4.7" x 2.7")Weight : 165 gramsMade in Japan.
Hand-forged 15mm Kiridashi carving marking chisel
¥5,995
Japanese Kiridashi Kogatana Shōzō wood-bamboo chisel marking carving knife. Hand-forged by japanese blacksmith craftsman. Size : 15 mmLength of the blade : about 17 cmBlade thickness : about 2 mmWeight : about 42 grams Blade is made of blue steel Aogami II with hammer eyes. Made in Japan.
Wood Carving marking Kiridashi Yoshiharu Chisel knife
¥1,495
Japanese Yoshiharu Kiridashi carpenter marking carving precision knives. Available for right or left handed. Total length : 16 cm (6.3")Length of the blade : about 6 cm (2.4")Length of the cutting edge : 4 cm (1.6")Blade thickness : about 2 mmWeight : about 56 grams (including sheath)Blade : Hard SteelHandle : Elastomer non slipSheath : ABS re...
Hand-forged 12mm Kiridashi carving marking chisel
¥5,995
Japanese Kiridashi Kogatana Shōzō wood-bamboo chisel marking carving knife. Hand-forged by japanese blacksmith craftsman. Size : 12 mmLength of the blade : about 17 cmBlade thickness : about 2 mmWeight : about 34 grams Blade is made of blue steel Aogami II with hammer eyes. Made in Japan.
Hand-forged 9mm Kiridashi carving marking chisel
¥5,995
Japanese Kiridashi Kogatana Shōzō wood-bamboo chisel marking carving knife. Hand-forged by japanese blacksmith craftsman. Size : 9 mmLength of the blade : about 17 cmBlade thickness : about 2 mmWeight : about 20 grams Blade is made of blue steel Aogami II with hammer eyes. Made in Japan.
Hand-forged 15mm short Kiridashi carving marking chisel
¥5,995
Japanese Kiridashi Kogatana Shōzō wood-bamboo chisel marking carving knife. Hand-forged by japanese blacksmith craftsman. Size : 15 mm short modelLength of the blade : about 17 cmBlade thickness : about 2 mmWeight : about 42 grams Blade is made of blue steel Aogami II with hammer eyes. Made in Japan.
Set of 5 hand-forged Kiridashi carving marking chisel
¥26,995
Set of 5 Kiridashi Kogatana Japanese Shōzō wood-bamboo chisels marking carving knives. Hand-forged by japanese blacksmith craftsman. Size : 9 mm, 12 mm long, 12 mm short, 15 mm long, 15 mm short Length of the blade : about 17 cmBlade thickness : about 2 mmWeight : between 20 and 40 grams Blade is made of blue steel Aogami II with hammer eyes....
Hand-forged 12mm short Kiridashi carving marking chisel
¥5,995
Japanese Kiridashi Kogatana Shōzō wood-bamboo chisel marking carving knife. Hand-forged by japanese blacksmith craftsman. Size : 12 mm short modelLength of the blade : about 17 cmBlade thickness : about 2 mmWeight : about 34 grams Blade is made of blue steel Aogami II with hammer eyes. Made in Japan.
