12mm Wood carving round gouge chisel Yasugi blue paper Steel
Verwandte Produkte
Set SENKICHI Chisel oire nomi Yasugi Steel 9 15 24mm
¥10,995
Set of 3 original Japanese SENKICHI wood Oire Nomi chisels. Size : 9 mm, 15 mm, 24 mm Chisels are about 23 cm long (9"). They are very well balanced, with a Red Oak handle and an iron hoop at the end. The blade is made of laminated Hitachi Yasugi Steel. Made in Japan.
Chisel plane adjustable honing guide
¥2,895
SK-11 Chisel and wood plane adjustable sharpening honing guide SSG-70.Allows both chisels and plan irons to be held at a constant and steady angle when sharpening and honing. Move the guide up and down on the blade to increase or decrease the angle.Clamping width range : - For chisels : 6-36 mm (0.24" - 1.4")Blade length : 60 mm or more (2.4")Bl...
Wood Carving marking Chisel knife Kiridashi
¥2,195
Japanese Kiridashi carpenter marking carving precision knife. Total length : 15,5 cm (6.1")Length of the blade : about 6 cm (2.4")Length of the cutting edge : 4 cm (1.6")Blade thickness : about 1,5 mmWeight : about 45 grams (including sheath)Blade : SK SteelHandle : WoodMade in Japan.
Marking gauge Kebiki with 2 blades
¥2,795
Small japanese Kebiki marking gauge with 2 adjustable single-bevel marking blades. They leave a very fine and tear-out-free mark without tearing the grain. The advantage of the blade is that it cuts the fibres, whereas a needle tears them. It can be used to cut a single line or both blades can be used in tandem to lay out a mortise or tenon.Si...
Wood Carving marking Kiridashi Chisel knife YOSHIHARU
¥1,495
Japanese Kiridashi YOSHIHARU carpenter marking carving precision knives. Available for right or left handed. Total length : 12,8 cm (5")Length of the blade : about 3,7 cm (1.46")Blade thickness : about 1 mmWeight : about 20 grams (including sheath)Blade : SteelHandle : BrassMade in Japan.
Hand-forged 15mm kensaki shirabiki Spear point marking knife
¥4,895
Japanese double edge "Ikeuchi Hamono" Hand-forged Kensaki shirabiki spear-point marking knife. Hand-forged by japanese master blacksmith Ikeuchi. Size : 15 mmLength of the blade : about 16 cmBlade thickness : about 2 mmWeight : about 50 grams Blade is made of lamination of blue steel Aogami (HRC 63) and soft steel with hammer eyes.For right- ...
3mm SENKICHI Chisel oire nomi Yasugi Steel
¥3,395
3 mm Japanese SENKICHI wood chisels.(available from 3 mm to 42 mm in my store)They are very well balanced, with a Red Oak handle and an iron hoop at the end. The blade is made of Hitachi Yasugi Steel. Size : 3 mm Weight : 85 gramsChisel is about 23 cm long (9"). Made in Japan.
Marking gauge small Kebiki with 2 blades
¥3,195
Small japanese Fujiwara Kebiki with 2 adjustable single-bevel marking blades. They leave a very fine and tear-out-free mark without tearing the grain. It can be used to cut a single line or both blades can be used in tandem to lay out a mortise or tenon.Size : 110 mm x 120 mm x 70 mm (4.3" x 4.7" x 2.7")Weight : 165 gramsMade in Japan.
Set of 11 SENKICHI Chisel oire nomi Yasugi Steel
¥44,995
Set of 11 Japanese SENKICHI wood chisels.They are very well balanced, with a Red Oak handle and an iron hoop at the end. The blade is made of Hitachi Yasugi Steel. Size : 3 mm, 6 mm, 9 mm, 12 mm, 15 mm, 18 mm, 21 mm, 24 mm, 30 mm, 36 mm, 42 mm.Chisels are about 23 cm long (9"). 3 mm : 85 grams 6 mm : 90 grams 9 mm : 110 grams12 mm : 120 gr...
6mm SENKICHI Chisel oire nomi Yasugi Steel
¥3,495
6 mm Japanese SENKICHI wood chisels.(available from 3 mm to 42 mm in my store)They are very well balanced, with a Red Oak handle and an iron hoop at the end. The blade is made of Hitachi Yasugi Steel. Size : 6 mm Weight : 90 gramsChisel is about 23 cm long (9"). Made in Japan.
42mm SENKICHI Chisel oire nomi Yasugi Steel
¥6,095
42 mm Japanese SENKICHI wood chisels.(available from 3 mm to 42 mm in my store)They are very well balanced, with a Red Oak handle and an iron hoop at the end. The blade is made of Hitachi Yasugi Steel. Size : 42 mm Weight : 240 gramsChisel is about 23 cm long (9"). Made in Japan.
30mm SENKICHI Chisel oire nomi Yasugi Steel
¥4,995
30 mm Japanese SENKICHI wood chisels.(available from 3 mm to 42 mm in my store)They are very well balanced, with a Red Oak handle and an iron hoop at the end. The blade is made of Hitachi Yasugi Steel. Size : 30 mm Weight : 185 gramsChisel is about 23 cm long (9"). Made in Japan.
